Stamped Concrete Services in Spring Hill TN - a patterned slab sealed at the right time
Tired of a cracked, plain slab? We pour a stamped patio, walk or driveway on a packed base and seal it once it cures.
- Licensed and insured.
- Free on-site estimates.
- We respond within 1 business day.
What goes into a stamped concrete patio or driveway?
Complete Spring Hill Concrete provides stamped concrete services in Spring Hill, TN. We press a stone, slate or brick pattern into a fresh patio, walkway or driveway, then seal it after the concrete has cured, a few weeks after the pour, so it sheds water and stains.
Most people who call about stamped work have an old slab that's cracked, sunk or just plain. Others have a bare spot in the yard and want a patio that looks like more than gray concrete. The price moves with the size of the area, the pattern, whether there's old concrete to tear out, how much base work the ground needs and how easily the truck can reach it. The schedule turns on the permit question, the weather on pour day and the wait for the concrete to cure before it can be sealed. I'll spell all of that out for your job at the estimate, along with your price.
How do you know it's time to replace your slab?
Cracks running every direction
Cracks that wander across the slab instead of following the joints usually mean the joints were cut late or never cut. Patching them rarely holds, and a slab that's already cracking tends to keep opening up.
One side sinking lower
A corner or edge that's dropped usually means the base was raked level instead of dug out and packed, so it settled with the dirt underneath. It tends to keep going, and the lip between slabs turns into a trip edge.
Water pooling by the house
Puddles that sit against the foundation mean the slab falls toward the house, or settled until it does. Every rain puts water right where you don't want it, so this is the one I wouldn't wait on.
How we do stamped concrete, start to finish
We start under the surface. If there's an old slab, we break it out, then dig out and pack the subgrade, the dirt and stone the slab sits on, because a base that's only raked level settles and takes your pattern with it. We set square forms and check which way the water runs, so the finished slab falls away from the house. We pour early in the day to stay out of the midday heat that leaves a weak, dusty top, press the stamps while the concrete is still soft, and cut control joints, shallow cuts that give the slab a straight place to crack, on time so any crack lands in a joint and not across your pattern. Then we wait. Stamped work gets sealed once it has cured, not the week it's poured, and a concrete standard puts full cure at 28 days, though that shifts with the time of year. We'll also show you how to tell when it's time to reseal by how the surface looks, because sealing too often builds up layers that are a chore to strip later. If the budget gets tight, I'd rather cut back the pattern than the base, since nobody sees a bad base on day one, but you'll see it in a few years.
Stamped work usually connects to something else. If a new stamped entry meets a tired front walk, our concrete sidewalk building can tie the two together at the same height. If the slab inside your garage is cracked or pitted too, garage floor concrete can be planned around the same visit.
Stamped patio
Suits a back patio you'll see every day and want to look like more than a gray slab. It gets foot traffic and furniture, so most of the choice comes down to the pattern and how much sheen you want from the sealer.
Stamped walk or front entry
Suits a front entry you want to dress up from the street. Since people walk it wet, a nonskid additive in the sealer is worth talking about at the estimate.
Stamped border on a plain slab
Suits a driveway or large patio where stamping every foot would run up the cost. A stamped band around the edges gives the look for less work, and the plain middle is simpler to keep up.
Get a free estimate for your stamped concrete
We respond within 1 business day to set up a visit. I come out, measure and write a free on-site estimate that spells out the job, and there's no pressure to book.
Call (931) 486-8126- Based in
- Spring Hill, TN 37174
- Hours
- Mon–Fri: 6 AM–9 PM, Sat–Sun: 8 AM–10 PM
What happens when you call about stamped concrete in Spring Hill?
Here's how a stamped job runs from your first call to the walk-through, and who you'll be dealing with at each step.
Call or send the form
Call (931) 486-8126 or send the form with the rough size of the area, whether it's a patio or driveway, and a plot plan if you have one. We'll set a time for me to come out.
I measure and watch drainage
I come out myself, measure, look at how water moves across the property and ask how you plan to use the space. You get an estimate that spells out the job, so you can see what's driving the price before you decide.
Permit, base and forms checked
Before we start, we check the permit question with the office that covers your address. I check the base, the forms and the joint layout before a truck is called, because none of that can be fixed once it's poured.
Pour, cure, then walk through
We pour, stamp and cut the joints, then give the concrete time to cure. Once it has, we walk the finished job together.
Why Spring Hill homeowners call us for stamped concrete
I measure it and run the pour
I come out to look at the job and write the estimate, and I run the crew on pour day. The person who told you how the forms would sit is the one standing there when they get filled.
Trained to reset a crooked form
I learned under an old-school finisher who'd make me pull a form and reset it if it was off by a hair, and I started this business in Spring Hill in 2021 with that habit. On stamped work it shows in straight edges and a pattern that lines up with the house.
Licensed and insured on every job
We're licensed and insured. The City of Spring Hill's patio permit form asks for a contractor's license and insurance on jobs of $25,000 and up, so you won't be scrambling for that paperwork.
Straight answers at the estimate
I'd rather tell you something you don't want to hear at the estimate than have to explain it a year later. Our work is backed by our satisfaction guarantee.
A stamped surface only looks as good as the base under it, so that's where we start. Call us or send the form to set up a visit.
Stamped patios, walks and driveways in Spring Hill
The permit side here is up to the city. It takes permit applications for concrete patios, and its policy doubles the permit fee if any work starts before there's a permit. Driveway work goes through the city's engineering side, and its applications and permits page lists a driveway extension application, a land disturbance application and a right-of-way permit application. Which of those your job needs depends on what we're pouring and where, and your address may fall under the city or the county. So we find out which office covers it, handle the paperwork when the job needs a permit, and don't start until that's settled.
On jobs here we see a lot of newer homes with back patios on lots that slope toward the house, so the drainage check comes before anything else. We're based in Spring Hill and run into the same thing on stamped jobs in Franklin and Columbia, along with Brentwood and other cities around them.
Questions about stamped concrete in Spring Hill
Call (931) 486-8126How much does stamped concrete cost in Spring Hill, TN?
Stamped concrete in the Nashville area usually costs about $13 to $26 per square foot. That's the market's usual range, not a quote from us. Your own number comes from the estimate I write after measuring your space.
What is the best sealer for stamped concrete?
A film-forming sealer is the most common choice for stamped concrete because it brings up the color. Most penetrating sealers leave the color as it is, so they're worth weighing if water and stain protection matter more to you than a richer look. I'll go over both with you at the estimate.
How often does stamped concrete need to be resealed?
Reseal when the surface tells you to, not on a calendar. The signs are water and stains soaking in instead of sitting on top, or color that's lost its depth. Trying to keep a high gloss by resealing every year can cause trouble, so a softer sheen between reseals is normal.
How do I get a permit for a concrete patio in Spring Hill, TN?
The city takes permit applications for concrete patios by email at permits@springhilltn.org, and the patio permit application asks for a plot plan and a drawing of the structure. A permit expires 6 months from the date it's paid, so the work needs to happen inside that window. If you have a plot plan for your lot, have it handy at the estimate.
Can I use salt on new stamped concrete in the winter?
Keep deicing salt and chemicals off new concrete for its first winter, and use them in moderate amounts after that. That's the usual guidance for new concrete, and stamped work is no different.
What causes stamped concrete to flake on top?
Most flaking on top, called scaling, comes from concrete with too little entrained air or none, especially near the surface. It's fair to ask any contractor whether the mix is air-entrained, and you should get a straight answer.
Related concrete work around a stamped job
Concrete sidewalk building
A cracked or tipped front walk leading to a new stamped entry looks worse by contrast, and a new walk poured to match keeps the step-up even.
Garage floor concrete
If your garage slab is cracked, sunken or pitted, pouring a new one around the same time as your stamped work can save a second round of setup.
Service areas for stamped concrete near Spring Hill
Complete Spring Hill Concrete is based in Spring Hill, TN, and seven cities have their own page here, including Thompson's Station and Brentwood. We work in other cities around them too, so give us a call if yours isn't on the list.
Spring Hill, TN
Get your stamped concrete measured and priced
Call (931) 486-8126 or send the form, because the sealing waits on the cure and an early start gives the job room to finish before you want to use the space.