Concrete floor installation in Spring Hill TN - ready for the finish you plan
Need a new concrete floor for a basement, shop or addition? We pour a slab matched to what goes on top of it.
- Licensed and insured.
- Free on-site estimates.
- We respond within 1 business day.
What's involved in installing a concrete floor in Spring Hill?
Concrete floor installation in Spring Hill means we place, finish and cure a new interior slab so it's ready for the tile, carpet, wood or coating you plan to put on it.
Most floor calls come from someone finishing a basement, closing in a shop or adding a room, or tearing out an old floor that cracked or let water through. The price moves with the size of the floor, how much digging and base work the spot needs, what goes under the slab and how smooth the top has to be. The schedule turns on the weather around the pour, whether the job needs a permit, and how long the concrete has to cure before your flooring goes down. The estimate puts those pieces in writing for your floor. If the space is a garage, our garage floor concrete page covers that job.
How do you know it's time for a new concrete floor?
A crack with a lip
When one side of a crack sits higher than the other, the ground under the slab has usually moved. Left alone, the edge keeps catching and chipping, and it breaks through whatever flooring you lay over it.
Flooring that won't stay down
Tile that pops loose, glue that lets go or a musty smell under carpet usually points to moisture coming up through the slab. Covering it again without fixing what's underneath means paying for the flooring twice.
A floor that dips or slopes
If a ball rolls to one corner or furniture rocks, the slab has settled or was poured out of level. New flooring won't hide it for long, and the low spots are where spilled water sits.
A new room with no floor
Bare dirt or gravel in an addition or shop is the easiest place to get a floor right, because the ground is open for us to check. Waiting usually means working around framing and finishes later, which costs more.
How we handle concrete floor installation
Early on I ask whether the floor will be covered or coated, because that tells us how smooth it needs to be and where the moisture barrier belongs, and industry guidance says that barrier protects flooring and coatings best when it sits right against the slab. Then we dig out and pack the subgrade, the ground the slab sits on, so it doesn't settle later, and we set the forms square. Before the pour I'll show you where the control joints will go, the straight cuts that give the slab a planned place to crack. We place and finish the concrete to the surface your floor needs, then let it cure, which is the wait that lets it gain strength before anything heavy goes on it. When a budget gets tight, the base is the first thing people want to trim because nobody sees it on day one, and it's the last thing I'll cut, because a nice finish over a soft base cracks right along with it.
A floor job often brings other concrete work with it. If the new room sits above the yard outside its door, we can pour concrete steps that line up with the floor height, and if it opens onto the backyard pool, our concrete pool decks page covers the outdoor slab.
Under tile, carpet or wood
This suits basements, additions and living space, because a floor that gets covered doesn't need the dense, slick surface a bare floor does. More of your money goes into the base and the moisture barrier, where it does the most good.
Coated or left as bare concrete
This suits shops, work rooms and floors you plan to seal or coat, because the slab itself is the surface you'll see and walk on. It takes more finishing passes to get it smooth and even, and that extra work shows in the price.
Get a written estimate for your concrete floor
We reply within one business day to set a time, then I come out, measure and write a free estimate with no pressure to book. Have the square footage, your finish plans and timing handy.
Call (931) 486-8126- Based in
- Spring Hill, TN 37174
- Hours
- Mon–Fri: 6 AM–9 PM, Sat–Sun: 8 AM–10 PM
What happens after you call about a concrete floor in Spring Hill?
Here's how a floor job runs from your first call to the day we walk the cured slab together.
Call and set a visit
Call (931) 486-8126 or send the form and tell us about the room. We set a time for me to come out to your house.
I measure and write the estimate
I measure, look at how water moves around the house and ask how you'll use the floor. The estimate spells out the job, so you can see what you're paying for before you decide.
Permits first, then the prep
Before we start, we check the permit question with the office that covers your address. Then I check the base, the forms and the joint layout before a truck is called.
Walk the cured floor together
Once the concrete has cured, we walk the finished floor with you. You see the edges, the joints and the surface before anything goes on top.
Why Spring Hill homeowners call Complete Spring Hill Concrete for floors
The owner at estimate and pour
We're based in Spring Hill, and I come out myself to write the estimate, then run the crew on pour day. The person who told you how the floor would go is the one standing there while it's poured.
In business since 2021
I started this company in 2021 after learning from a finisher who'd make me pull and reset a form if it was off by a hair. That's why square forms and clean edges are the first things I look at on your job.
Licensed and insured on your job
We're licensed and insured. You shouldn't have to wonder whose coverage applies while a crew and a concrete truck are at your house.
Straight answers before the pour
If your base needs more work or the finish you want won't suit the room, I'd rather tell you at the estimate than explain it a year later. Our work is backed by our satisfaction guarantee.
When you're ready, send us your floor details or call (931) 486-8126, and I'll set a time to come out.
Concrete floors and the work around them in Spring Hill
Inside the city, the Spring Hill Building Department takes permit applications and handles the inspections that follow for building work. On residential construction permits, the city's permit checklist asks for slab details in the plans, so the floor has to be worked out on paper before it's poured. Whether your floor needs a permit depends on the job, so we find out which office covers your address, city or county, handle the paperwork when one is needed, and don't start until that's settled.
On jobs here we see a lot of basement finish-outs, shop floors and additions on newer houses, and the same kinds of calls on jobs in Franklin and Columbia. Maury County's 2016 building planning sheet lists the county as high potential for radon, so when your address is in Maury County I bring it up while we talk about what goes under the slab.
Questions about concrete floors in Spring Hill
Call (931) 486-8126How much does a concrete floor cost in Tennessee?
Concrete slab work in Tennessee usually runs about $6 to $11 per square foot, and that's a statewide market figure, not our price. Where your floor lands depends on its size, the base work, what goes under the slab and how smooth the top has to be, and the estimate spells that out for your job.
Will my new concrete floor crack?
Some cracking is likely, because industry guidance says getting rid of all cracks and curling, where the edges lift a little as the slab dries, isn't realistic even with the best design and building methods. Without control joints a slab can crack at random, so the joint layout I show you before the pour decides where those cracks go.
Can concrete be poured in cold weather in Spring Hill?
Yes, but it takes extra care, because concrete can be permanently damaged if it freezes before it has gained enough strength. Industry guidance calls for special steps to hold the temperature of the concrete during a cold-weather pour, so if your job lands in winter, ask us how we'll handle it and we'll build it into the schedule.
Who handles the permit for a concrete floor in Spring Hill?
We do when your floor needs one, working with the city's Building Department mentioned above. Order matters, because a city policy doubles the permit fee if any work starts before there's a permit, so nothing on our side starts until that's settled.
How do I know if a bid includes the right moisture barrier under the slab?
Ask what material goes under the slab, because industry guidance says plain polyethylene sheeting has been used in the past but shouldn't be counted on for moisture protection below a slab. Our estimate names what goes under your floor, so you can compare it line for line with any other bid.
What is the best way to cure a new concrete floor?
For most jobs, industry guidance says curing means putting a curing compound on the fresh concrete or covering it with sheets that hold the moisture in or with wet burlap. Which one fits depends on the season and what goes on the floor later, and we talk it through before the pour.
Other concrete work that pairs with a new floor
Concrete steps construction
When a new room sits above the yard outside its door, poured steps give you a solid landing and an even rise that lines up with the floor.
Concrete pool decks
If the new floor opens onto a pool area, a deck poured with a textured surface keeps bare feet steadier and drains water away from the house.
Service areas for concrete floor work
Complete Spring Hill Concrete is based in Spring Hill, TN, and we pour floors in Franklin, Columbia and the other cities listed here. These 7 cities have their own pages, and we work in other cities around them too.
Spring Hill, TN
Book a look at your floor space
Calling before the framing or flooring is ordered gives us room to plan the slab height and finish around them.